Distance measuring

Operation, interface

The 5-pin chassis connector is fully engaged. If the RS 485 interface is not required, cable-side the pins 2 and 5 are blank. Two built-in buttons allow an individual parameterization. Each design is available with the outputs 0-10 V, 0-20 mA, 4-20 mA; type code eg MKL for 15:19 0-10 V, 0-20 mA and for MKL 015 190 015 194 MKL for 4-20 mA.

For orders of 10 sensors you will get the practiacal interface converter MK-Soft 2 for free on demand.